Are There Any Special Considerations For The Hoisting Method Of Double Bottom Ton Bags

Dec 04, 2025

Leave a message

The hoisting of Double Bottom Ton Bags has clear requirements and must be operated in strict accordance with specifications. First is the selection of lifting points. The lifting lugs attached to the ton bag are the only stress points for hoisting. It is necessary to ensure that all lifting lugs bear force at the same time; hoisting with a single lug or diagonal lugs is strictly prohibited to avoid material spillage caused by the bag tilting. In addition, the lifting lugs must be intact without damage or aging; they cannot be used if there are cracks or loose stitches.​
Second is the matching of lifting tools. Special ton bag lifting tools (such as four-hook balanced lifting tools) must be used. If ordinary hooks are used, it is necessary to ensure that the hooks fully catch the root of the lifting lugs, avoiding the hooks only catching the edge of the lifting lugs to prevent the lifting lugs from falling off during hoisting. The load-bearing capacity of the lifting tool must be greater than the full load weight of the Double Bottom Ton Bag, with a safety margin reserved.​
Finally is the operation specification. When hoisting the Double Bottom Ton Bag, it is necessary to keep the ton bag rising vertically to avoid collision with surrounding equipment or walls. No one is allowed to stand under the bag after it is lifted. When lowering, it is required to move slowly and at a constant speed to prevent the bottom of the ton bag from bearing excessive force due to sudden stops or drops, which may affect the stability of the double bottom and ensure the safety of the entire hoisting process.

 

Double Bottom Ton Bags

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!