Ton bags refer to large-capacity flexible packaging containers made of soft and foldable materials such as polypropylene base fabric, coated fabric, interwoven fabric, and aluminum foil composite materials. They are mainly used to package bulk materials such as powder and granules, such as grains, dry goods, mineral sands, and chemical products. Among them, anti-static aluminum foil ton bags are also suitable for dangerous goods such as calcium carbide.
Although there are various types of bulk bags and container bags in the market now, they all share some commonalities. The main classifications are as follows:
1. By bag shape, there are mainly four types: cylindrical, cube, U-shaped, and rectangular.
2. By loading and unloading methods, there are mainly top lifting, bottom lifting, side lifting, forklift type, pallet type, etc.
3. By discharge port, they can be divided into two types: with discharge port and without discharge port.
4. By bag-making materials, there are mainly coated fabric, double warp base fabric, interwoven fabric, composite materials, etc. FIBC (Flexible Intermediate Bulk Container) bags. FIBC bags, bulk bag packaging source manufacturer
5. By the goods inside, they can be divided into bulk goods and small package goods.
6. By the number of uses, they can be divided into single-use and multi-use.
7. By the anti-static ability of the packaging bag, they can be further classified into four categories:
Class A FIBC bags: No special requirements, used for raw materials with no special static protection requirements;
Class B FIBC bags: Breakdown voltage less than 6 kilovolts, mainly used for raw materials with MIE (Minimum Ignition Energy) greater than 5mj;
Class C FIBC bags: Breakdown voltage less than 6 kilovolts, grounding resistance at each point on the bag is less than 10^8 ohms, mainly used for raw materials with MIE less than 5mj. Grounding must be done as required during loading and unloading;
Class D FIBC bags: Breakdown voltage less than 6 kilovolts, can safely release static electricity without sparks in flammable gases with MIE greater than 0.14mj. Mainly used for powder raw materials with MIE less than 1mj.
