1. The raw materials for making ton bags are mainly polypropylene, with a small amount of stabilizing additives evenly mixed. After being melted and extruded by an extruder to form plastic film, it is cut into threads and then stretched and heat-set to form high-strength, low-elongation PP original threads. Then, it is woven and laminated to form the base fabric of plastic woven bags. After being sewn with straps and other accessories, ton bags are made.
2. Hazards of basic ton bags
When the working environment where ton bags are used or the materials they carry contain flammable and explosive substances, such ton bags are prone to dangerous accidents such as static electricity ignition and explosion.
3. Relevant standards and tests for conductive ton bags
In 2003, the European NCLC organization released the standard: PD CLC/TR50404:2003 (June 2003). As early as May 2002, the IEC released a standard: IEC61340-4-4, which was further improved and revised, and a new standard: IEC61340-4-40:2005 was released in 2005.
4. Application scope of conductive ton bags
According to the standards of CLC and EC, the application scope of anti-static conductive ton bags is very wide. In addition to being used in workplaces where there are substances with low ignition energy, anti-static conductive ton bags are also necessary for packaging non-flammable substances. For example, in paint, ink, and glue production plants, ton bags for packaging substances such as titanium dioxide, talcum powder, and pigments should be anti-static conductive ton bags.
