As a manufacturer of Lifting Loop Bags, we specify the following fixing points based on the requirements for hoisting safety and efficiency:
First, confirm the type of lifting loops. For the four-loop type, hang the 4 lifting loops into the crane hooks respectively. Ensure the hooks are fully clamped into the load-bearing rings of the lifting loops, and avoid hanging only on the edges of the lifting loops. For the single-loop type, align with the central lifting loop on the top of the bag body to ensure the hooks and lifting loops bear force vertically.
When fixing, it is necessary to control the center of gravity. Before hoisting, adjust the distribution of materials inside the Lifting Loop Bag to prevent the bag body from tilting due to material deviation. After hooking, lift the crane slightly and observe whether the bag body is balanced. If it tilts, lower it for adjustment until the bag body is vertical.
In addition, the hooks should be of matching specifications. The opening size of the hooks should be slightly larger than the diameter of the load-bearing rings of the lifting loops to prevent unhooking during hoisting. Maintain a uniform speed for lifting and lowering during the hoisting process, avoid sudden stops and starts, reduce the shaking of the bag body, and ensure stable fixing.
For Lifting Loop Bags of special specifications, you can contact us to obtain customized hoisting and fixing suggestions to ensure operation safety.
